Blog Pages

10/19/18

PULTEC PCB LAYOUT COMPLETE

I finally finished the PCB layout for the power supply and the make-up gain preamp circuits.  For Revision "A" I am soldering the wires directly to the PCB. Revision "B" will use wire-board connectors.

Pultec Power Supply PCB


Trenton Blizzard Pultec EQP-1A clone Power Supply PCB

Pultec Preamp PCB 

Just like the power supply, the Revision "A" Preamp PCB has wires soldered directly to the PCB. Revision "B" will incorporate wire-board connectors as well.


More to come as the boards get assembled and tested.
Thanks for reading,
Trenton