Blog Pages

7/20/13

PULTEC PASSIVE EQ CLONE

PULTEC EQP-1A 

Just finished building my PULTEC 3U rack enclosure from http://collectivecases.com/pultec.html.
I'm very excited to get started on this project. This will be a clone build of a classic passive equalizer! My printed circuit board came from http://www.dripelectronics.com/.

COST
Rack cost was around $130 not including shipping. The transaction was a breeze. Also, it was shipped in a reasonable time frame considering that when I purchased it they still had to be painted.


FEATURES
1. (2) XLR and (1) IEC power inlet cutouts on back panel
2. Sides are vented
3. No holes on top or bottom panels (You will need to drill those yourself)

TWEAKS
I needed to enlarge the front 4 mounting holes a bit in order to get things to align.

QUALITY
Build quality is very good using heavy gauge steel with an aluminum front panel.
Fit-N-Finish was also good. Note: Make sure to bolt your front panel on first for good alignment.

As always, you will find my build information right here so please stay tuned!

No comments:

Post a Comment